Guides
Options trading articles in Guides.
- MFE and MAE explained: are you closing winners too early? — Max gain seen and max drawdown seen measure how far a closed trade ran for and against you while it was open. Work out capture, giveback and heat by hand from four real trades, then see where MetisTrades shows the same figures.
- Trade Path: how far each closed trade ran for and against you — Realized P/L tells you what a trade booked, not what it was worth while it was open. Trade Path replays every closed option trade on end-of-day option quotes and measures capture, heat and what holding would have done.
- Replaying one options trade with Trade Backtest — Trade Backtest replays a single options trade from a past entry date on end-of-day closes. This guide follows one SPY put spread from setup to result, then covers rolls, bulk runs and the limits of the answer.
- Tracking Poor Man's Covered Calls with PMCC Campaigns — A poor man's covered call is one long-dated call plus every short call you sell against it. This guide shows how to log that campaign by hand, then how MetisTrades links the same trades and reports premium collected, % of cost recovered and net P/L.
- Monte Carlo simulation: what it is and where MetisTrades uses it — A Monte Carlo simulation replays an uncertain future thousands of times and reports the spread instead of one number. Learn to run a small one by hand from your own closed trades, then see the three places MetisTrades runs one for you.
- Uploading your broker's transaction file, with AI-assisted mapping for any format — How to export activity from your broker, upload it into the right trading account, and work through the AI-assisted mapping review when your broker is not on the list — then confirm every row landed.
- Choosing automatic or manual roll detection — MetisTrades can link an option close and its replacement open into a roll chain for you, or show only the chains you build by hand. Here is where that account-wide switch lives, what it changes, and how to confirm the setting saved.
- Sharing a Read-Only View of Your Portfolio with a Share Link — How to create a public, read-only link to one trading account in MetisTrades, what a viewer can and cannot see, and how to revoke or delete the link when sharing should end.
- Exporting, inspecting and resetting account data in MetisTrades — How to take a re-importable export of one trading account, review the manual adjustments you have made to it, and reset or clear that account without touching the others.
- Setting up an import with the Universal Template — If your broker is not one of the listed formats, the Universal Template gives you a layout MetisTrades can read. This guide covers the required columns, the transaction codes for cash and income rows, and how to confirm the upload landed.
- Connecting a brokerage for automatic sync — How to link a brokerage login through SnapTrade, map each brokerage account to the right trading account, and control when syncing runs — plus how to confirm the first import landed correctly.
- Setting Up Trading Accounts: One Container per Broker Portfolio — Create one trading account for each brokerage portfolio so positions, rolls and wheel cycles never get matched across accounts. Walk through the Trading Accounts card, naming, ordering and checking the result.
- A Tour of Account Settings in MetisTrades — Account Settings holds your profile, subscription, trading accounts, brokerage connections, data and uploads, sharing and AI connections. Here is what each section does and how to check your setup is in order.
- Creating an account and signing in to MetisTrades — How to start an account, choose between email-and-password and NOSTR sign-in, verify an emailed link, accept the Terms, and keep the transactions you loaded before signing in.
- Getting Started with MetisTrades: From Empty Account to Tracked Portfolio — A walkthrough of the four setup steps in MetisTrades: getting your transactions in, checking how they were grouped into positions, correcting classifications and roll chains, and confirming the result looks like your account.
- Connecting Claude, ChatGPT or another AI assistant to your MetisTrades data — How to link an outside AI assistant to your MetisTrades account, decide which trading accounts it can read, approve or dismiss the changes it suggests, and revoke it when you are done.
- Asking Zelus for a portfolio report: the capability browser and the one-click reports — How to find report-style questions in Zelus' "What can I ask?" browser, run a Full Open Positions Report on a focused slice of your book, and read every section of the reply without over-reading it.
- How Zelus Credits Work: Allowance, Top-Ups and What a Reply Costs — Set up and read your Zelus credit balance: where the meter lives, how the monthly allowance and purchased credits differ, what a single reply costs, and how to check the charge after an answer.
- Letting Zelus draft changes for you to review — Zelus can prepare portfolio changes as reviewable cards: groupings, notes, alerts, plans and manual transactions. Nothing is written until you select Apply. Here is how the propose-then-approve flow works, with a worked XYZ example.
- Meet Zelus: the AI assistant that answers questions about your own portfolio — Zelus is the MetisTrades AI account assistant. This guide follows one covered-call position on XYZ to show what Zelus can look up, how to ask a question that gets a usable answer, and how to check what it tells you.
- Protecting a Stock Position With Options: Puts, Spreads and Collars — Work out the real cost and the real floor of a protective put, a put spread and a collar on the same 400-share position, then see where MetisTrades designs and compares those hedges for you.
- Premium-Adjusted Cost Basis for Covered-Call Holders — Covered-call premium lowers the effective cost of the shares you own, but it never changes the cost basis your broker reports. Here is how to track both numbers by hand, and how MetisTrades keeps them side by side.
- Shares Moved From Another Broker: Fixing Missing Cost Basis — Shares transferred in from another brokerage arrive without their purchase history, so their cost basis is missing. Here is how to reconstruct the original cost by hand, and how to record it in MetisTrades so your holdings and tax-lot estimates include them.
- Tracking dividend income: received payments vs projected ones — How to keep a dividend log that separates cash you actually received from estimates of what is coming, with a worked example, the arithmetic behind each column, and how MetisTrades shows the same two views.
- Seeing your stock holdings in one place: value, sector, account and income — Learn to build a single view of every stock you own — shares, value, unrealized gain, sector and account spread, and the dividends they pay — first by hand in a spreadsheet, then on the MetisTrades Stocks Overview page.
- Researching a stock before you sell options on it — Stock Research puts company, price, valuation, fundamentals, dividend, news and ownership information for one symbol on a single page. Here is how to read it before you write a put or a call, and what it cannot tell you.
- AI Projections: chart outlooks you can check later — AI Projections queues a model-generated chart outlook for a symbol and target date, saves the run, and scores it once the date passes and a close is captured. Here is how to run one, read it, and audit it later.
- The poor man's covered call, and how to evaluate one — A poor man's covered call swaps 100 shares for a deep in-the-money LEAP call. This guide works through one XYZ setup by hand, then uses PMCC Analysis to project short-call income, payback and risk across four price scenarios.
- Testing Wheel Settings With the Wheel Analyzer — The Wheel Analyzer runs wheel-strategy settings against stored historical options data, then lets you compare completed runs. This guide walks through one XYZ comparison, the setup steps, and how to read the output honestly.
- Backtesting an Options Strategy with the Strategy Backtester — How to configure a strategy, run it over a historical window, and read the saved results honestly — including win rate, drawdown, skipped days and the limits of a daily-close simulation.
- Reading one symbol in depth: the Options Analyzer deep dive — The Options Analyzer deep dive expands one watchlist symbol into an end-of-day review of momentum, volatility, positioning and contract activity. Here is how to work through it in order, and how to read each panel honestly.
- Screening a Watchlist with the Options Analyzer — The Options Analyzer ranks a curated watchlist by end-of-day options statistics and momentum, then shortlists individual contracts. Here is how to run a screen on one symbol, read every column, and question what the scores are telling you.
- Building and Stress-Testing a Trade in the Position Analyzer — Build an options position leg by leg in the MetisTrades Position Analyzer, test it against price, time and volatility changes, and read the payoff numbers without over-reading them.
- Understanding margin, cash and loan-to-value — Margin debt is just a negative cash balance, and loan-to-value measures it against your collateral. Learn to reconstruct cash from your ledger, calculate LTV by hand, stress-test it against a market drop, and see how MetisTrades does the same work.
- Setting personal portfolio risk limits and checking them against your open book — Concentration, sector, cash and leverage limits only work if you write them down and check them. Learn to size exposure and compare it with your limits by hand, then see how Plan → Risk does the same checks across your open positions.
- Keeping a Watchlist of Planned Trades — How to record entry ideas with a trigger price and the collateral each one needs, check them against your buying power, and act only when conditions are met — by hand in a spreadsheet, then in MetisTrades.
- Planning retirement income from an options portfolio — How to project withdrawals, dividends, other income and option premium year by year, check whether income covers spending, and read a range of outcomes instead of a single line.
- Planning a Margin Paydown: Setting a Destination LTV and Tracking Progress — Learn how to turn a margin balance into a dated paydown plan: pick a destination loan-to-value, work out the monthly payment, and check each month whether you are ahead or behind. Includes a worked spreadsheet example.
- Setting and Tracking an Options Income Goal — How to define a monthly premium goal, measure net option premium, dividends and interest against it, and work out what would close the gap. Includes a spreadsheet method and how Plan → Income does the same job.
- Exit plans: deciding how you will leave a trade — Write your profit target, max loss and time exit before you need them, track them in a simple journal, and score how you actually left each trade. Then see how MetisTrades records and scores the same plans.
- Planning Your Portfolio: A Tour of the Plan Tab — The Plan tab records what you intend to do — exits, entries, risk limits, income, margin paydown and retirement — then measures the gap against your actual book. Here is how the six sections fit together, followed through one worked example.
- Win Rate Is Not Enough: Expectancy and Profit Factor — A 87.5% win rate can still leave you with almost nothing to show for it. Learn how average win, average loss, expectancy and profit factor complete the picture, how to calculate them by hand, and where MetisTrades already does the counting.
- Measuring wheel cycle returns: premium, stock result and days held — A wheel cycle only makes sense when you measure the put premium, the call premium and the stock result together. Here is how to total a completed cycle by hand, and how the Wheel Cycles page in MetisTrades builds the same record from your transactions.
- Did Your Rolls Pay Off? Measuring Roll Results Across the Whole Chain — A roll does not end a trade, it continues one. Learn to judge rolls by the lifetime result and premium flow of the whole chain instead of the last leg, by hand and then in MetisTrades.
- Getting an AI Review of Your Open Positions — AI Open Positions writes a report on the risk and management of the option positions you still hold. Here is a worked XYZ portfolio, the steps to generate a report, and how to read and question what it says.
- Getting an AI review of your closed trades — How to filter your closed positions in MetisTrades, read the performance summary, and generate an AI Trade Coach report — plus how to question what the write-up tells you.
- Simulating the range of results ahead from your own closed trades — Your trading record is one sample of what could have happened. This guide shows how to resample your own closed trades by hand into a fan of outcomes, drawdowns and losing streaks — and where that method stops being trustworthy.
- Comparing Results by Tag: Which of Your Setups Actually Pays — Your broker sorts trades by strategy. Tags let you sort them by the reason you took them. This guide shows how to score your own tags by hand with a six-trade example, then how Tag Analysis in MetisTrades does the same comparison.
- Building a custom dashboard in MetisTrades — How to turn on My Dashboard, pick the statistics, charts, tables and exposure widgets you actually read, and understand what each figure covers. Follows one trader's XYZ-heavy year end to end.
- Reading your dashboard statistics: what each headline number actually measures — Total P/L, realized P/L, open positions and win rate each cover a different slice of your trading. Work through a small XYZ example by hand, then see how the MetisTrades Dashboard recalculates the same figures for the period and account scope you choose.
- Position Alerts: Getting Told When Something Changes — How MetisTrades alert rules are checked on the server, what a fired alert actually tells you, and how to acknowledge and reactivate rules so they watch your positions again.
- Where the prices come from: delayed quotes vs your own cash flows — MetisTrades shows two different profit-and-loss figures: one built from your imported transactions, one built from delayed market quotes. This guide walks a single XYZ position through both so you know which number you are reading.
- Tracking Several Brokerage Accounts Without Mixing Them Up — Keep one ledger per broker, then roll them up into a single portfolio view. This guide shows the by-hand method with a worked two-account example, and how MetisTrades separates and combines accounts.
- Tags and notes: adding your own context to positions — Tags are short private labels on positions; notes are dated entries on a position or a single transaction. This guide shows how to apply them consistently and how to read what Tag Analysis reports back.
- Grouping and Splitting Imported Option Legs Correctly — When a broker file combines option legs that never belonged together — or leaves a spread in pieces — MetisTrades lets you group, ungroup or split the contracts. Here is a worked example of all three corrections.
- Keeping a Clean Transaction Ledger: Your Portfolio's Source of Truth — Every position, P/L figure and tax estimate you look at is built from individual activity rows. Here is how to keep that ledger by hand, and how Transaction History in MetisTrades searches, groups, annotates and corrects the same rows.
- Inside one position: legs, history and context — The Position details dialog gathers everything MetisTrades knows about a single position. Follow one rolled XYZ covered call through its summary, legs, timeline, stock context and roll chain, and learn what each figure means.
- Keeping Track of Open Positions: Legs, Days to Expiry and Mark-to-Market P/L — What an open-positions record needs to be useful: every leg, days to expiry, and profit or loss at the latest available mark. Build one by hand with three worked rows, then see how MetisTrades keeps the same list current.
- Tracking assignments and exercises: shares, basis and what happened next — An assignment turns an option position into a stock position, and your record keeping has to follow it. Learn to log each assignment by hand with a worked three-row example, then see how MetisTrades links premium, share basis and later sales.
- Tracking covered-call income by symbol — How to total the premium each symbol has produced, record outcomes, and work out a premium-adjusted share cost by hand — then how the Covered Calls page in MetisTrades keeps the same record for you.